5.9 ft Inflatable Snowman and Penguins with LED Lights, Outdoor Yard Decor

Description

One large snowman with three small penguins gathered at his feet, all four in hats and scarves, lit from inside. The group reads well from the street because the penguins give the eye somewhere to go after the main figure, which a single snowman does not.

The inflated size is 140 x 70 x 180 cm, or 55.1 x 27.6 x 70.9 in, so the true height is a shade under six feet. The supplier’s specification is unusually complete for this category: 190T polyester, an IPX4 rating, 110V 60Hz at 9.6W, and five light bars carrying fifteen LED beads in total.

One honest caveat. CJ’s own material attribute field for this item reads “Plastic”, while the supplier’s specification block says 190T polyester. Those two disagree. Polyester is what an inflatable of this construction is normally made from and it is the more specific of the two entries, so that is what we have quoted, but we have not had one in hand to settle it. Ask us before ordering if the exact fabric matters to you.

Power and placement

The built-in blower plugs into a standard US outlet and brings the piece up in about two minutes. It has to stay powered to stay inflated, so the outlet decides the position. Use an outdoor rated cord on a GFCI outlet for anything beyond a few feet, and route it clear of the path people walk.

Anchoring

This one ships with a better than average kit: four ground stakes, two ropes of 4.9 ft each, and three sandbags. The sandbags are the useful part, because they work on a deck or a driveway where stakes are no help at all. The IPX4 rating covers rain and splashing, not submersion, so keep the blower housing clear of standing water and puddling.

It deflates through a zip at the base and folds down small for storage.